User’s Manual 6-16
Hardware & Options Operation
HDMI device
The device is equipped with an HDMI out port that can send video by
connecting with external devices. 1080p, 720p, 576p and 480p signal
formats are supported, but actually available signal format depends on
each HDMI device.
You can switch the display mode between Internal display only, Mirror
mode and External display only by pressing the hot key ( ) on the
keyboard.
To connect external devices, follow the steps as detailed below:
1. Plug one end of the HDMI cable into the HDMI port of the HDMI
device.
2. Plug the other end of the HDMI cable into the HDMI out port on your
device.
Figure 6-9 Connecting a HDMI cable
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.
1. HDMI out port
2. HDMI cable
■ When you connect a television or external monitor to the HDMI port
and the display mode will be changed to mirror mode. When you
unplug the HDMI cable and re-plug it in please wait at least 5 seconds
before you replug the HDMI cable again.
To Next Page
Loading...
Need help?
General
