User’s Manual 6-13
Hardware & Options Operation
Memory card care
■ Set the write-protect switch to the lock position, if you do not want to
record data.
■ Memory cards have a limited lifespan, so it is important to backup
important data.
■ Do not write to a card if the battery power is low. Low power could affect
writing accuracy.
■ Do not remove a card while read/write is in progress.
About the write-protect
The following memory media have a function for protect.
■ SD Card (SD memory card, SDHC memory card)
Inserting a memory media
The following instructions apply to all types of supported media devices.
To insert a memory media, follow the steps as detailed below:
1. Turn the memory media so that the contacts (metal areas) are face
down.
2. Insert the memory media into the Bridge media slot on the left side of
the device.
3. Push the memory media gently to ensure a firm connection is made.
The memory media will be partially out of the slot.
Figure 6-6 Inserting a memory media
For more details on using memory cards, see manuals accompanying the
cards.
Set the write-protect switch to the lock position, if you do not want to record
data.
1. Bridge media slot
2. Memory media
To Next Page
Loading...
Need help?
General