User’s Manual 6-14
Hardware & Options Operation
Removing a memory media
The following instructions apply to all types of supported media devices.
To remove a memory media, follow the steps as detailed below:
1. Make sure all file operations are finished.
2. Click the Launcher tab -> Settings -> Settings -> Device storage ->
Unmount sdcard.
3. Grasp the memory media and pull it out of the device.
Figure 6-7 Removing memory media
■ Make sure memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
■ When inserting memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
■ Do not turn the device off or switch to Suspend Mode while files are
being copied - doing so may cause data to be lost.
1. Bridge media slot
2. Memory media
■ Do not remove the memory media while the device is in Suspend
mode. The device could become unstable or data in the memory media
could be lost.
■ Do not remove only the miniSD/microSD Card while leaving the
adaptor in the Bridge Media slot.
To Next Page
Loading...
Need help?
General
