Trane CVHG Information Manual

Refrigerant Report
Information Manual 17
Refrigerant Monitor
The following item is displayed if the Analog
Refrigerant Monitor option is installed.
The following items are displayed if the IPC
Refrigerant Monitor option is installed.
The following screen is displayed if the refrigerant
monitor scanner is installed:
The following screen is displayed if the channel
scanner is not installed:
Possible values of Mode are: Warmup, Ready,
Monitor Check, Trouble.
If the PPM is out of range low or high “-Err” and
“++++” respectively are displayed. If the
concentration has not been determined, or the
refrigerant monitor is in “Monitor Check” mode, “-----”
is displayed.
The following is displayed if the channel scanner
option is installed.
If the PPM is out of range low or high “-Err” and
“++++” respectively are displayed. If a channel is
inactive, “-----” is displayed.
The following is displayed if the IPC Refrigerant
Monitor Auxiliary input option is installed.
Approach Temperature
Refrigerant Monitor: xxx.x PPM
Press (Next)(Previous) To Continue
Refrigerant Monitor Mode: [Mode]
Scanner Channel X XXXX PPM [Rfgt Type]
Refrigerant Monitor Mode: [Mode]
XXXX PPM [Rfgt Type]
Last Rfgt Conc Chan1 Chan2 Chan3 Chan4
PPM [Rfgt Type] XXXX XXXX XXXX XXXX
Refrigerant Monitor Case Temp: XXX.X F
Refrigerant Monitor Bench Temp: XXX.X F
Rfgt Mon Auxiliary Input: XX.X mA
Press (Next) (Previous) To Continue
Evaporator Approach Temp: XXX.X F
Condenser Approach Temp: XXX.X F

Trane CVHG Specifications

General

Brand	Trane
Model	CVHG
Category	Chiller
Language	English