Trane CVHG Information Manual

Service Tests Group
60 CVHE-CLD-1A
AF Compressor Speed Command -
CVHE/F/G Only
The following is displayed only if the Starter Type is
“Adaptive Frequency” or AFDB” or the Compressor
Power Source is Engine/Generator.
Note This is a Report only for Troubleshooting
purposes.
AF Boundary Pressure Coefficient/AF
Pressure Coefficient - CVHE/F/G Only
The following is displayed only if the Starter Type is
“Adaptive Frequency” or “AFDB” or the Compressor
Power Source is Engine/Generator.
Note This is a Report only for Troubleshooting
purposes.
AF Re-Optimization Timer Time
Remaining- CVHE/F/G Only
The following is displayed only if the Starter Type is
“Adaptive Frequency” or “AFDB” or the Compressor
Power Source is Engine/Generator.
Note This is a Report only for Troubleshooting
purposes.
Module Software Revision Levels
If <Enter> is selected the following screen can be
displayed 5 times with 5 different pairs of modules.
Module 1/2 will be one of the following: Chiller,
Circuit, Starter, Options, Stepper 1, Stepper 2, TCI,
Purge, LCLD, RCLD, I/O, Refrigerant Monitor,
Scorpio, DCM.
Revision Level will either be an integer representing
the software version number of the particular module
or occurrence of a diagnostic, the display will
automatically go to this menu and display certain
messages as explained in the next section
“Diagnostics Menu.”
AF Compressor Speed Command: xx.x Hz
AF Compressor Speed Command:xxxx.x RPM
AF Boundary Press Coefficient: x.xxx
AF Pressure Coefficient: x.xxx
AF Re-Optimization Time Remaining:x.xx Hrs
Press (+)(-) to Change Setting
Press (Enter) To Display Software
Revision Levels Or (Next) To Continue
[Module 1:] [Revision Level]
[Module 2:] [Revision Level]

Trane CVHG Specifications

General

Brand	Trane
Model	CVHG
Category	Chiller
Language	English