Trane Tracer AdaptiView User Manual

CTV-SVU01G-EN
15
Figure 4. Component screen example for Simplex chillers
1
2
1. Data Graph shortcut button
2. Component screen shortcut buttons
DDuupplleexx CChhiilllleerrss
Each component has a separate screen for circuit 1 and circuit 2.
• If you touch anywhere on an evaporator or condenser component touch target, a screen
appears containing data related to circuit 1 of that component (refer to the following figure).
• If you touch in the circuit 1 data area of a compressor, motor, or purge component touch
target, a screen appears containing data related to circuit 1 of that component. If you touch in
the circuit 2 data area of a compressor, motor, or purge component touch target, a screen
appears containing data related to circuit 2 of that component.
Circuit 1 and Circuit 2 buttons at the bottom of each component screen (see Location 4 in the
following figure) allow you to toggle between circuit 1 and circuit 2 component screens.
You can use the shortcut buttons at the top of each of the component screens (see Location 2 in
the preceding figure) to view the other components screens. If you are viewing a circuit 1
component screen and touch a shortcut button, the circuit 1 screen for the component
represented by that button appears; and likewise for circuit 2.
“Appendix B: Data for CenTraVac Duplex Chillers ,” p. 77 lists the settings and status points that
are accessible from each of the component screens. The chiller configuration determines which
of the settings and status points appear.
PPrroodduucctt OOvveerrvviieeww

Trane Tracer AdaptiView Specifications

General

Brand	Trane
Model	Tracer AdaptiView
Category	Monitor
Language	English