Trane Tracer AdaptiView User Manual

CTV-SVU01G-EN
39
Equipment Settings
You can use the Tracer® AdaptiView™ display to monitor and change a variety of equipment
settings.
The Settings Screen
Touch the SSeettttiinnggss button in the main menu area (see “Main Menu Area,” p. 17) to view the
Settings screen. Equipment Settings identifies a column of buttons located on the screen. (Refer
to the outlined column in the following figure.) The buttons are:
• Chiller Settings
• Feature Settings
• Chiller Water Reset
• Purge Settings
• Manual Control Settings
Each of these buttons provide access to a screen that contains additional buttons related to each
topic. This section provides detailed information about these screens.
Figure 21. Settings screen with the Equipment Settings column highlighted
Viewing and Changing Equipment Settings
Each button in the Equipment Settings column on the Settings screen takes you to a menu
screen that contains a group of buttons. Each button displays the name of a setting and its
current value (refer to the following figure). Touch any button to view a screen where you can
change the setting for the feature shown on the button.
NNoottee:: A page number appears in the lower right corner of the screen. If a screen contains more
than one page, up/down arrows also appear for viewing the other pages, as in the
following figure.

Trane Tracer AdaptiView Specifications

General

Brand	Trane
Model	Tracer AdaptiView
Category	Monitor
Language	English