Trane Tracer AdaptiView User Manual

CTV-SVU01G-EN
7
Product Overview
The Tracer® AdaptiView™ display provides a means for viewing data and for making operational
changes on the following types of chillers:
• Simplex (single compressor) CenTraVac™ chiller models
• Duplex™ (dual compressor) CenTraVac™ chiller models
The purpose of this guide is to assist you in using the Tracer® AdaptiView™ display. This guide
describes how to access the screens and the types of information that appear on the screens.
Equipment Description
The basic equipment features of the Tracer® AdaptiView™ display are described here.
HHaarrddwwaarree
The Tracer® AdaptiView™ display is mounted on or near the chiller control panel. It can be
attached to the chiller by an arm that can extend 11 inches. Five pivot points enable full
articulation as described in the following specifications and in the figure:
Figure 1. The Tracer AdaptiView mounting arm
• Two horizontal pivots points 90º right or left (180º total)
• Two vertical pivots points: 90º degrees up or down (180º total)
• Rotation: 135º clockwise and 135º counterclockwise (270º total)
SSccrreeeenn CChhaarraacctteerriissttiiccss
The 12.1-inch color touch-screen display shows data in either inches and pounds (I-P) or standard
international (SI) units, and in one of twenty-seven available languages. Animated color graphics
indicate the status of the chiller and its components.

Trane Tracer AdaptiView Specifications

General

Brand	Trane
Model	Tracer AdaptiView
Category	Monitor
Language	English