EasyManuals Logo

Triumph Speedmaster User Manual

Triumph Speedmaster
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
General Information
Steering Lock Key
1. Steering lock key tag
The steering lock key operates the steering
lock only. A different key operates the ignition
switch.
When the motorcycle is delivered from the
factory, two steering lock keys are supplied
together with a small tag bearing the key
number. Make a note of the key number and
store the spare key and key number tag in a
safe place away from the motorcycle.
Your authorised Triumph dealer can supply a
replacement key cut from details of the key
number or can cut a new key using the
original as a master.
Steering Lock
1. Steering lock cover
2. Steering lock
This is a two position, key operated lock. The
key can be removed in either the engaged or
disengaged positions.
To engage the lock, insert the key and push
the complete lock inwards while turning
anti-clockwise. At the same time turn the
handlebars fully left until the lock engages (at
which point the lock will turn and move
inwards).
To disengage the steering lock, insert the key,
turn the handlebars slightly to relieve any
weight on the lock and turn the key further
anti-clockwise until the lock springs outwards.
Remove the key.
Caution
Do not store the spare key with the
motorcycle as this will reduce all aspects of
security.
T908012
1
Warning
Always disengage the steering lock before
riding as, with the steering lock engaged, it
will not be possible to turn the handlebars
or steer the motorcycle.
Riding without motorcycle steering control
will lead to loss of control and an accident.
cebr
2
1

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speedmaster and is the answer not in the manual?

Triumph Speedmaster Specifications

General IconGeneral
Displacement1200 cc
Bore x Stroke97.6 mm x 80 mm
Compression Ratio10.0:1
Max Torque106 Nm @ 4, 000 rpm
Fuel SystemMultipoint sequential electronic fuel injection
ClutchWet, multi-plate assist clutch
Gearbox6-speed
Rear Tyre150/80 R16
Engine TypeLiquid-cooled, 8-valve, SOHC, 270°
Max Power76.9 bhp (57.4 kW) @ 6, 100 rpm
Exhaust2-into-2 exhaust system with twin silencers
FrameTubular steel
Rear SuspensionTwin shocks, adjustable preload
Front BrakeTwin 310mm discs, 2-piston floating calipers
Rear BrakeSingle 255mm disc, 2-piston floating caliper
Front Wheel32-spoke
Rear Wheel32-spoke
Tank Capacity12 L

Related product manuals