EasyManuals Logo

Triumph Speedmaster User Manual

Triumph Speedmaster
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
General Information
Running-In
Running-in is the name given to the process
that occurs during the first hours of a new
vehicle's operation.
In particular, internal friction in the engine will
be higher when components are new. Later
on, when continued operation of the engine
has ensured that the components have
'bedded in', this internal friction will be
greatly reduced.
A period of careful running-in will ensure
lower exhaust emissions, and will optimise
performance, fuel economy and longevity of
the engine and other motorcycle
components.
During the first 500 miles (800 kilometres):
Do not use full throttle.
Avoid high engine speeds at all
times.
Avoid riding at one constant engine
speed, whether fast or slow, for a
long period of time.
Avoid aggressive starts, stops, and
rapid accelerations, except in an
emergency.
Do not ride at speeds greater than
3/4 of maximum engine speed.
From 500 to 1000 miles (800 to
1500 kilometres):
Engine speed can gradually be
increased to the rev limit for short
periods.
Both during and after running-in has been
completed:
Do not over-rev the engine when
cold.
Do not let the engine labour. Always
downshift before the engine begins
to 'struggle'.
Do not ride with engine speeds
unnecessarily high. Changing up a
gear helps reduce fuel consumption,
reduces noise and helps to protect
the environment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speedmaster and is the answer not in the manual?

Triumph Speedmaster Specifications

General IconGeneral
Displacement1200 cc
Bore x Stroke97.6 mm x 80 mm
Compression Ratio10.0:1
Max Torque106 Nm @ 4, 000 rpm
Fuel SystemMultipoint sequential electronic fuel injection
ClutchWet, multi-plate assist clutch
Gearbox6-speed
Rear Tyre150/80 R16
Engine TypeLiquid-cooled, 8-valve, SOHC, 270°
Max Power76.9 bhp (57.4 kW) @ 6, 100 rpm
Exhaust2-into-2 exhaust system with twin silencers
FrameTubular steel
Rear SuspensionTwin shocks, adjustable preload
Front BrakeTwin 310mm discs, 2-piston floating calipers
Rear BrakeSingle 255mm disc, 2-piston floating caliper
Front Wheel32-spoke
Rear Wheel32-spoke
Tank Capacity12 L

Related product manuals