Triumph Speedmaster User Manual

28
General Information
Fuel
Fuel Grade
Your Triumph engine is designed to use
unleaded fuel and will give optimum
performance if the correct grade of fuel is
used. Always use unleaded fuel with an
octane rating of 91 RON minimum.
Warning
Do not attempt to adjust the levers with the
motorcycle in motion as this may lead to
loss of control and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic to
gain familiarity with the new lever settings.
Do not loan your motorcycle to anyone as
they may change the lever settings from
the one you are familiar with possibly
causing loss of control or an accident.
Caution
In many countries, the exhaust systems for
these models are fitted with catalytic
converters to help reduce exhaust emission
levels. The catalytic converters can be
permanently damaged if the motorcycle is
allowed to run out of fuel or if the fuel level
is allowed to get very low. Always ensure
you have adequate fuel for your journey.
Caution
The use of leaded petrol is illegal in some
countries, states or territories. Use of
leaded fuel will damage the catalytic
converter.
P

Triumph Speedmaster Specifications

General

Displacement	1200 cc
Bore x Stroke	97.6 mm x 80 mm
Compression Ratio	10.0:1
Max Torque	106 Nm @ 4, 000 rpm
Fuel System	Multipoint sequential electronic fuel injection
Clutch	Wet, multi-plate assist clutch
Gearbox	6-speed
Rear Tyre	150/80 R16
Engine Type	Liquid-cooled, 8-valve, SOHC, 270°
Max Power	76.9 bhp (57.4 kW) @ 6, 100 rpm
Exhaust	2-into-2 exhaust system with twin silencers
Frame	Tubular steel
Rear Suspension	Twin shocks, adjustable preload
Front Brake	Twin 310mm discs, 2-piston floating calipers
Rear Brake	Single 255mm disc, 2-piston floating caliper
Front Wheel	32-spoke
Rear Wheel	32-spoke
Tank Capacity	12 L