Unify OpenScape IP 35G SIP User Manual

Individual phone configuration 175
Pattern sequence
z
You can also configure this setting via the WBM interface  Page 198.
Prerequisite: You have choosen the "pattern" ringtone, see  Page 173.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown and then select the required Ringer tone
sequence between 1 and 6 (e.g.
2). You immediately hear the set Ringer melody
with the select Ringer tone sequence. Confirm the selected setting.
Select and confirm the option shown.
Country setting for speakerphone mode
Enter the country setting you prefer for speakerphone mode here (see
 Page 36).
z
You can also configure this setting via the WBM interface  Page 198.
Settings Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
if nec.j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the setting you want in the context menu ("Standard mode"
or "US mode.
Select and confirm the option shown.
Settings
User
Audio
Settings?
Ringer tone sequence = 2 f
Save & Exit l
Settings
User
Audio
Settings?
Open listening = Standard mode f
Save & Exit l

Unify OpenScape IP 35G SIP Specifications

General

Brand	Unify
Model	OpenScape IP 35G SIP
Category	IP Phone
Language	English