108 Making calls in the team/executive/secretary configuration
MULAP conference release
If configured (consult your service personnel), you can program a sensor key on
your phone with the function "MULAP Privacy Release"
page 71. The default
label is "Priv Release".
If you program this key, you do not have to use the menu to set up a conference.
Your team partner only has to press the flashing trunk key associated with your
trunk on his or her phone to immediately join the conference.
[ You are conducting a call.
S Press the "Priv Release" key. The LED lights up.
Up to three team members can now join the conference.
Prerequisite: The trunk on which you are speaking is configured on the other
phone as a trunk key.
T Press the flashing trunk key.
To Next Page
Loading...
Need help?
General