Unify OpenStage 60 T User Manual

Using team functions 113
Using team functions
If configured (consult your service personnel), your telephone is part of a team.
The team consists of internal phones that are able to use certain functions.
Activating/deactivating a group call
If configured (consult your service personnel), you belong to one or more groups
of stations, which can be reached via hunt group or group call station numbers.

Incoming calls are signaled one after the other (= hunt group) or simultaneously
(=
group call) on all phones in the group, until a group member answers the call.
You can also belong to a team (including executive/secretary configurations) in
which station numbers are programmed on trunk keys
 page 105.
Every group member can still be reached at his or her personal phone number.
You can activate and deactivate the audible signal for a hunt group, group call
or individual trunks in a group (including executive/secretary).

If the LED on a programmed "Hunt group" key is illuminated  page 71, this
means that the audible tone was activated for at least one group.
c Open the idle menu  page 26.
Select and confirm the option shown
1
.
or
Select and confirm the option shown.
or
S or R Press the "Hunt group".
This function is not available for the executive phone in team/executive/
secretary configurations.
Leave group
1. ”Differing display view in a HiPath 4000 environment”  Seite 144
Join group

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English