Unify OpenStage 60 T User Manual

112 Making calls in the team/executive/secretary configuration
Transferring calls directly to the executive
phone
Normally, all calls for the executive are audibly signaled only by the secretary
phone.

You can set audible signaling so calls are signaled only by the executive phone
or by a second phone assigned to it.
Prerequisite: On your phone there is a sensor key programmed with the func-
tion "Ring Transfer". The default label is "Ring xfer".
Activating
S Press the "Ring xfer" key. The LED lights up.
or
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required trunk key.
or
j Enter the required trunk number.
Deactivating
R Press the "Ring xfer" key. The LED goes out.
or
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required trunk key.
or
j Enter the required trunk number.
This function is only available for the executive/secretary configuration.
Ring Transfer: On
Ring Transfer: Off

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English