Unify OpenStage 60 T User Manual

Privacy/security 91
Monitoring a room
You can use a phone to monitor a room. This function must be enabled on the
monitoring phone.

When you call this phone, you can immediately hear what is happening in that
room.
Activating the telephone to be monitored
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
You can either leave the telephone in speakerphone mode or lift the handset and
leave it directed towards the noise source.
Deactivating the telephone to be monitored
v Press the lit key. The LED goes out.
or
\ Replace the handset.
Monitoring the room
j Enter the internal station number of the phone located in the room that you wish
to monitor.
Trace call: identifying anonymous callers
(not for U.S.)
You can identify malicious external callers. You can record the caller’s phone
number during a call or up to 30 seconds after a call.
In this case, you should
not hang up.
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
Room monitor
Trace call
If the trace is successful, the transmitted data is stored by your network op-
erator. Contact your service personnel.

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English