Unify OpenStage 60 T User Manual

76 Programming sensor keys
Changing the label
The label set when a repdial key was programmed can also be subsequently
changed.
Changing the label
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required sensor key.
The seizure is displayed on the screen.
Confirm.
if nec.
Select and confirm to make the change on the second level.
Select and confirm the option shown.
Confirm.
j Enter the required key label text  page 22.
Confirm.
or
Select and confirm to reset to the default label.
Select and confirm the option shown.
or
Select and confirm to cancel the entry.
Confirm.
Deleting sensor key programming
S Hold down the required key.
Select and confirm the option shown.
if nec.
Select and confirm the option shown to delete the entries on the second level.
Select and confirm the option shown.
Select and confirm the option shown.
Prog. feature key
Change key
+=Next layer
Key label
Change
Change
Default label
Save
Previous
Exit
Assign functionality
Next layer
Clear key
Exit

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English