Unify OpenStage 60 T User Manual

60 Enhanced phone functions
Leaving a conference
g Open the context menu  page 28.
Select and confirm the option shown.
or
\ Replace the handset, if this feature is configured (contact your service person-
nel).
Activating tone dialing/DTMF suffix-dialing
You can transmit dual-tone multifrequency (DTMF) signals to control devices
such as an answering machine or automatic information system.
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
Select and confirm the option shown.
j You can use the keys 0 through 9, ) and
(
to transmit DTMF sig-
nals.
Recording a call
If configured (contact your service personnel), you can record an ongoing call.
Prerequisite: You are on a call, the "Recording" key is configured  page 71.
S Press the "Recording" key. The LED lights up.
You and the other party hear an acoustic announcement, indicating that record-
ing has started, and an acoustic signal is emitted approx. every 15 seconds dur-
ing the entire recording session.
Stopping recording
R Press the illuminated "Recording" key. The LED goes out.
Listening to a recording
Playback of the recording depends on the voice recording system used (see the
associated user guide).
Leave conference
Calls g
DTMF dialing
Ending the call also deactivates DTMF suffix dialing.
Your system may be configured so that you can start DTMF suffix-dialing
immediately after setting up a connection.
During recording, it is not possible to add further call parties.

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English