Unify OpenStage 60 T User Manual

74 Programming sensor keys
Programming a procedure key
Numbers and functions which require further input, i.e. which contain several op-
erating steps, can be saved on a key on your telephone.
S Press and hold the required sensor key.
Select and confirm the option shown.
or
v Open the Program/Service menu  page 36.
Select and confirm the option shown.
S Press the required sensor key.
If the key is already in use, the programmed phone number appears on the
screen.

Confirm the option shown.

Confirm.
Select and confirm the option shown.
Confirm.
j Enter procedure. Example:
*67 Code for associated dialing.
231 Number of the phone to for which the call should be made.
01234 the number to be called.
if nec.S Press "Pause" to enter pauses (a "P" appears on the display).
Confirm.
or If you make a mistake:
Select and confirm the option shown.
This deletes all entered digits.
if nec.
Select and confirm the option shown  page 76.
Confirm.
or
Select and confirm the option shown.
Assign functionality
Key assignments
Change key
Change key
More features g
Procedure key
Save
previous
Key label
Exit
Another key
Select the stored procedure by clicking the sensor key.
Procedures with activatable/deactivatable functions are activated by
pressing the sensor key once and deactivated by pressing it again.
You can press the procedure key during a call to automatically send the
saved digits as DTMF signals
 page 60.

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English