Unify OpenStage 60 T User Manual

64 Call forwarding
Call forwarding
You can immediately forward internal or external calls to different internal or ex-
ternal telephones (destinations). (An external destination requires special con-
figuration in the system.)
Select your preferred method:
• ”Call forwarding key”  Seite 65
• ”Activating call forwarding via the Program/Service menu”
 Seite 68
You can program additional call forwarding instructions via the Program/Service
menu,
”Using system forwarding instructions”  Seite 69.
Active call forwarding indication
An active call forwarding instruction is indicated on the display when your phone
is idle
 page 26:
r The LED lights up.
The call forwarding icon, the station number and, where applicable, the name of
the forwarding destination are displayed on the first line below the status bar.

The name of the party is used if stored in the phonebook.
If call forwarding is activated for internal or external calls, the number is preced-
ed by the abbreviation "INT" or "EXT".
When call forwarding is active, a special dial tone sounds when you lift the
handset.
If DID DTMF is active (contact your service personnel), you can also for-
ward calls to this destination.
The call forwarding key flashes if you are a call forwarding destination
 page 16.
220870 Dalai Lama
INT Dalai, Lama

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English