20 Getting to know your OpenStage phone
Programmable sensor keys
Your OpenStage 60 T/80 T has eight illuminated sensor keys to which you can assign functions or
numbers.
Depending on how they are programmed, you can use the sensor keys as:
• Function keys page 71
• Repdial keys
page 75
• Procedure keys
page 74
Touch the key to activate the programmed function or dial the stored number.
Press and hold a function key or repdial key to open a menu for programming it. Direct station se-
lection (DSS) keys can only be programmed via the service menu.
A label indicating the key’s function is displayed to the left of the key; it cannot be changed. You
can change the labels for repdial or DSS keys according to your requirements
page 76.
The status of a function is shown by the LED on the corresponding sensor key.
Meaning of LED displays on function keys
Increase the number of programmable sensor keys by connecting a key module page 15.
You can program internal and external station numbers on the second level for all program-
mable sensor keys (except the Shift key). The LED function is not available for internal sta-
tion numbers on the second level.
LED Meaning of function key
S Off The function is deactivated.
T Flashing
1
1 In this manual, flashing sensor keys are identified by this icon, regardless of the flashing interval. The flashing interval
represents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status.
R On The function is activated.
The programmable sensor keys on multi-line phones function as trunk keys page 106.
To Next Page
Loading...
Need help?
General