Unify OpenStage 60 T User Manual

Using team functions 115
Accepting a call for another member of your
team
You can use your own telephone to accept calls for other telephones in your
team, even while engaged in an ongoing call. To do this, contact your service
personnel to find out if a pickup group has been configured.
Prerequisite: Your telephone rings briefly. "Call for:" appears on the upper dis-
play line with the station number/name of the originator; the station number/
name of the caller appears on the lower line.
Select and confirm the option shown.
Ringing group
You can have calls for your telephone signaled audibly at up to five other internal
phones. The phone that answers the call first receives the call.
Saving, displaying, and deleting telephones for the ringing group
v Open the Program/Service menu  page 36.
Confirm.
Select and confirm the option shown
1
.
Follow the display prompts (enter the internal station number).
Removing all telephones in a call ringing group
c Open the idle menu  page 26.
Select and confirm the option shown.
Pickup - group
Destinations g
Ringing group on
1. ”Differing display view in a HiPath 4000 environment”  Seite 144
If your phone belongs to a ringing group, your display will show the station
number or the name of the originator on the upper line and that of the caller
on the lower line.
Ringing group off

Unify OpenStage 60 T Specifications

General

Brand	Unify
Model	OpenStage 60 T
Category	IP Phone
Language	English