TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
41
6. Handset Configuration
6.5.9 Prevent Mute function
It is possible to prevent that the handset is muted/set to silent by a user.
1 Select Audio > General.
2 In the Prevent silent drop-down list, select one of the following:
• On - The user cannot set the handset to silent by using mute or decreasing
the volume.
• Off - The user can mute/reduce the volume to silent in the handset (default).
6.5.10 Prevent Calls from being saved in the Call list
It is possible to prevent that the handset stores outgoing and incoming calls in the Call
list. This can be useful to prevent that an unauthorized person views the call list.
1 Select Device > Call.
2 In the Enable call list drop-down list, select “Off” to prevent all calls being saved.
6.5.11 Battery Warning
1 Select Device > Settings
2 In the Battery warning drop-down list, select one of the following:
• Sound repeatedly
• Sound once
• Sound off
6.5.12 Shared Phone
This setting defines if the handset is personal or shared. The default setting is “No” but
if “Yes” is selected, the handset can be used by several users. Each user can still have
their individual settings and access them using personal login and a password (the
password can be a common password for all users or the call number). To use the
Shared phone functionality, the following is required:
• The handset does not use certificate.
•WSG
A handset that is personal can also use a shared password (empty or specific) from the
WSG.
NOTE: If you accidentally enter a personal phone number in the shared handset, the
handset becomes personal and cannot be used as a shared phone any longer.
The handset must be configured to act as a shared phone again.
1 Select Device > General.
2 In the Phone mode drop-down list, select one of the following:
• Personal
• Shared
NOTE: When the setting is changed, the handset is automatically restarted.
To Next Page
Loading...
Need help?
General