TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
1
1. Introduction
1. Introduction
This document is a guide for installing, configuring, and maintaining the functionality of
the WLAN Handset.
The OpenStage WL3 Voice over Wireless Fidelity (VoWiFi) system provides wireless
IP-telephony, messaging, and alarm functions to enterprise LANs. Using third-party
WLAN products and hardware and software developed in-house, the system enables
data and voice transmission together with seamless roaming.
Figure 1. OpenStage WL3 VoWiFi System
This document provides guidelines to install the WLAN Handset in a VoWiFi system.
The document describes the settings needed to make the handset function in a VoWiFi
system, and is targeted at the following personnel:
• System Administrator
• Service Technician
The handset is first configured using Easy Deployment, or using the Portable Device
Manager (WinPDM). In small systems where it is possible to collect all handsets to
update settings, daily maintenance is also done by using the WinPDM.OpenStage WL3
WSG Server (WSG) supports managing the handsets centrally using a web interface,
without the need to collect the handsets.
The handset behavior can be customized to suite each user profile.
It is recommended that the reader has basic knowledge of the VoWiFi system and
basic knowledge of handset registration in the PBX.
AP
AP
Device Manager
in WSG
Switch to IP Backbone/LAN/Internet
WinPDM
OpenStage WL3
IP-PBX
To Next Page
Need help?
General