10 - Circlip
❑ Always replace if removed
❑ Insert in shaft groove
11 - Clamp
❑ Always replace if removed
❑ Tension using Hose Clip Pliers - VAG1275A-
12 - CV Boot for Triple Roller Joint
❑ Check for tears and scuffing
13 - Clamp
❑ Always replace if removed
❑ Tension using Hose Clip Pliers - VAG1275A-
14 - Circlip
❑ Always replace if removed
15 - Joint
16 - Circlip
❑ Always replace if removed
❑ Insert into shaft groove using Circlip Pliers - VW161A-
17 - Triple Roller Star with Rollers
The chamfer -arrow- faces the drive axle splines.
Difference Between A Twelve-Point Bolt with Ribs and A Twelve-
Point Bolt without Ribs
The contact surfaces -arrow A- and -arrow B- are different on the
two-point bolts.
I - Twelve-point bolt with ribs -arrow A-
II - Twelve-point bolt without ribs -arrow B-
14.2 Drive Axle with Triple Roller Joint
AAR2600i, Disassembling and Assem‐
bling
Special tools and workshop equipment required
♦ Press Plate - VW401-
♦ Press Plate - VW402-
♦ Press Piece - Rod - VW408A-
♦ Press Piece - Rod - VW411-
♦ Press Piece - 37mm - VW416B-
♦ Press Piece - Multiple Use - VW447H-
♦ Hose Clip Pliers - VAG1275A-
♦ Torque Wrench 1331 5-50Nm - VAG1331-
♦ Torque Wrench 1332 40-200Nm - VAG1332-
♦ Clamping Pliers - VAG1682A-
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
122 Rep. Gr.40 - Front Suspension
ProCarManuals.com