5 Overview - Steering Column, RHD
Note
♦
Welding and alignment work on supporting or wheel carrying suspension components is not permitted.
♦
Always replace self-locking nuts.
♦
Always replace corroded bolts/nuts.
1 - Subframe with bracket
2 - Brake Pedal Crash Brace
❑ Allocation. Refer to the
Parts Catalog.
3 - Bolt
❑ 20 Nm
❑ Note the tightening se‐
quence ⇒ page 315 .
4 - Bolt
❑ 20 Nm
❑ Note the tightening se‐
quence ⇒ page 315 .
5 - Steering Column
❑ Removing and instal‐
ling. Refer to
⇒ “5.1 Steering Column,
Removing and Instal‐
ling, RHD”, page 308 .
6 - Bolt
❑ 30 Nm
❑ Always replace if re‐
moved
7 - Clutch Pedal Crash Brace
❑ Allocation. Refer to the
Parts Catalog.
5.1 Steering Column, Removing and Instal‐
ling, RHD
Special tools and workshop equipment required
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
308 Rep. Gr.48 - Steering
ProCarManuals.com