3 Overview - Front Axle
Note
♦
Welding and alignment work on supporting or wheel carrying suspension components is not permitted.
♦
Always replace self-locking nuts.
♦
Always replace corroded bolts/nuts.
♦
Bonded rubber bushings have a limited range of motion. Therefore, only tighten the threaded connections
on the components with bonded rubber bushings when the wheel bearing housing is lifted (curb weight
position). Refer to ⇒ “2 Wheel Bearing, Lifting to Curb Weight Position”, page 5 .
I - Overview - Subframe. Refer
to ⇒ “4 Subframe”, page 9 .
II - Overview - Front Suspen‐
sion and Control Arm. Refer to
⇒ “5 Front Suspension and
Control Arm”, page 37 .
III - Overview - Wheel Bearing.
Refer to
⇒ “6 Wheel Bearing”,
page 52 .
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
3. Overview - Front Axle 7
ProCarManuals.com
To Next Page
Loading...
Need help?
General
