Only then is an optimum function and long service life of the wheel bearing guaranteed.
9.2 Wheel Bearing/Wheel Hub on Vehicles
with Disc Brakes, Removing and Instal‐
ling
Special tools and workshop equipment required
♦ Puller - Grease Cap - VW637/2-
♦ Camshaft Installer Kit - Sleeve - 3241/4-
♦ Torque Wrench 1332 40-200Nm - VAG1332-
♦ Torque Wrench - VAG1410-
Removing
– Loosen the wheel bolts.
– Raise the vehicle.
– Remove wheel.
– Loosen dust cap from seat by tapping lightly on claw of Puller
- Grease Cap - VW637/2- -1-.
– Press of dust cap.
1 - Puller - Grease Cap - VW637/2-
– Remove the brake caliper and hang it on the vehicle body.
– Remove the brake rotor bolt and the brake rotor.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
9. Wheel Bearing, Disc Brake (Torsion Beam) 179
ProCarManuals.com
To Next Page
Need help?
General
