Component Tightening Specification
Universal joint to steering gear
♦ Use a new bolt
30 Nm
Union nut, pressure/return line to the steering gear 32 Nm
Exhaust system bracket to subframe
. Refer to ⇒ Engine Mechanical, Fuel Injection and Ignition; Rep. Gr. 26 .
Tightening Specification, Pendulum Support to the Transmission
Bolt Tightening Specification
M10 x 35
♦ Use a new bolt
50 Nm + 90° turn
M10 x 75
♦ Use a new bolt
50 Nm + 90° turn
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
350 Rep. Gr.48 - Steering
ProCarManuals.com
To Next Page
Loading...
Need help?
General
