Installing
Install in reverse order of removal, observing the following:
Note
♦
Bolts -1- and -3- are micro-encapsulated. They must be re‐
newed each time after loosening.
♦
Before new bolts are installed, the threads of the correspond‐
ing nuts must be cleaned.
♦
The speed nut -7- is damaged beyond repair during removal
and must be renewed.
Specified torques
♦ ⇒ “3.1 Assembly overview - bench seat/individual seats”, page
347
3.4.2 Removing and installing rear seat back‐
rest, Multivan, 3-seater bench seat
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1332-
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
3. Rear seats 371
To Next Page
Loading...
Need help?
General