Telephone Line Cord
Caution
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
Laser Safety
Laser Warning
This printer complies with laser printer performance standards set by governmental,
national, and international agencies and is certified as a Class 1 Laser Product. The
printer does not emit hazardous light because the beam is totally enclosed during all
modes of customer operation and maintenance.
Warning
Use of controls, adjustments, or performance of procedures other than those specified
in this manual can result in hazardous radiation exposure.
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established
environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe
operation of your printer.
Printer Location
• Place the printer on a level, solid non-vibrating surface with adequate strength to
hold the weight of the printer. The base printer weight without any packaging
materials is approximately 265 kg (583 lb.).
• Do not block or cover the slots or openings on the printer. These openings are provided
for ventilation and to prevent overheating of the printer.
• Place the printer in an area where there is adequate space for operation and servicing.
• Place the printer in a dust-free area.
• Do not store or operate the printer in an extremely hot, cold, or humid environment
For optimum performance environmental specifications, see Environmental
Specifications.
Xerox
®
Color 550/560/570 Printer1-4
User Guide
Safety
To Next Page
Loading...
Need help?
General