Power Switches
There are three power switches involved with the machine:
• The Ground Fault Interrupt Switch located at the rear of the machine. Check to make
sure this switch is set to On when the machine is shipped.
• The Main Power Switch (discussed in the Installation and Setup section) is located
inside the front cover of the machine.
• The Power On/Off Switch located on the top panel of the machine, which is the
primary way for you to turn on or off your printer.
Note
To switch on or off the main power to the machine, refer to Switching Main Power On/Off
in the Installation and Setup section for more information.
To Turn the Printer On
Check that the Main Power Switch is On and then press the Power On/Off Switch, located
on the right side of the top panel, to turn your machine on. The entire powering-up
process (to power on and complete a self-test) takes less than 3 minutes. Certain functions
of the machine, such as copying, will be available before other functions (for example,
printing).
To Turn the Printer Off
Press the Power On/Off Switch to turn your machine off.
3-5Xerox
®
Color 550/560/570 Printer
User Guide
Features
To Next Page
Need help?
General