Xerox Color 550 User Manual

Selecting Options for an Individual Job for Macintosh
To use specific printing options for a single job, change the settings before sending the
job to the printer.
1. With the document open in your application, click File, then click Print.
2. Select your printer from the Printer list.
3. From the Copies + Pages menu, select Xerox Features.
4. Select the desired printing options from the drop-down lists.
5. Click Print to print the job.
Saving a Set of Commonly Used Printing Options for Macintosh
You can define and save a set of options, so that you can quickly apply them to future
print jobs.
To save a set of printing options:
1. With the document open in your application, click File, then click Print.
2. Select your printer from the Printer list.
3. Select the desired printing options from the drop-down lists on the Print menu
screen.
4. Click the Presets menu, then click Save As.
5. Type a name for the printing options, then click OK.
6. The set of options is saved and will appear in the Presets list. To print using these
options, select the name from the list.
Selecting Finishing Options for Macintosh
If your printer has an appropriate finisher installed, finishing options such as stapling
and creasing are selected in the printer driver.
To select finishing features in the Macintosh printer driver:
1. In the printer driver, click the Copies + Pages menu, then select Xerox Features.
2. In the Paper/Output dialog box, click the arrow to the right of the Finishing section,
then select the desired finishing options.
6-9Xerox
®
Color 550/560/570 Printer
User Guide
Printing

Xerox Color 550 Specifications

General

Brand	Xerox
Model	Color 550
Category	Printer
Language	English