Xerox Color 550 User Manual

4. Control Panel: The Control Panel consists of a mimic display, buttons, and various
indicator lights.
5. Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to
remove and dispose of trimmer waste scraps.
Note
The top covers cannot be opened during normal operation or when the machine is idle.
The covers can be opened only when an indicator is lit and a jam/fault occurs within the
SquareFold Trimmer Module.
Paper path
1. The booklet leaves the booklet area of the finisher and enters SquareFold Trimmer
Module.
2. The Booklet Exit sensor (in the SquareFold Trimmer Module) detects the lead edge
(spine) of booklet and moves the booklet to square fold area.
3. Once the booklet spine reaches the square fold area, the booklet is clamped and
the square-folding operation begins.
4. The booklet is flattened and the spine squared according to the square-fold setting
indicated on the control panel.
5. After the booklet is flattened and the spine squared, it is moved to the trimmer area.
• Based on the finished booklet size, the booklet is moved until the trail edge
reaches the trimmer cutter.
• The trail edge is trimmed/cut (based on the finished booklet size entered for the
Trimmer Mode Setting).
6. The booklet then moves to the exit area where it is transported to the Booklet Output
Tray.
14-3Xerox
®
Color 550/560/570 Printer
User Guide
SquareFold Trimmer Module

Xerox Color 550 Specifications

General

Brand	Xerox
Model	Color 550
Category	Printer
Language	English