Warning
The points of the jammed staples are sharp. Remove the jammed staples carefully.
7. Remove the jammed staples (1), then push the clamp in the direction shown until
it snaps into the locked position (2).
8. Grip the staple cartridge by the orange handle and insert it into the stapler until it
clicks into place.
9. Close the finisher front door.
Clearing Staple Jams in the Standard Finisher
Warning
Do not perform this procedure when the printer is copying or printing.
11-11Xerox
®
Color 550/560/570 Printer
User Guide
Troubleshooting