A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
You may safely connect the machine to the following standard modular jack: USOC
RJ-11C using the compliant telephone line cord (with modular plugs) provided with the
installation kit. See installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a telephone line could result
in the devices not ringing in response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of the number of devices that
can be connected to a line, as determined by the total RENs, contact the local Telephone
Company. For products approved after July 23, 2001, the REN is part of the product
identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
To order the correct service from the local Telephone Company, you may also have to
quote the codes listed below:
• Facility Interface Code (FIC) = 02LS2
• Service Order Code (SOC) = 9.0Y
Warning
Ask your local Telephone Company for the modular jack type installed on your line.
Connecting this machine to an unauthorized jack can damage telephone company
equipment. You, not Xerox, assume all responsibility and/or liability for any damage
caused by the connection of this machine to an unauthorized jack.
If this Xerox
®
equipment causes harm to the telephone network, the Telephone Company
could temporarily discontinue service to the telephone line to which it is connected. If
advance notice is not practical, the Telephone Company will notify you of the
disconnection as soon as possible. If the Telephone Company interrupts your service,
they can advise you of your right to file a complaint with the FCC if you believe that it
is necessary.
The Telephone Company could change its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens, the Telephone
Company should notify you in order for you to make necessary modifications to maintain
uninterrupted service.
If you experience trouble with this Xerox equipment, contact the appropriate service
center for repair or warranty information. Contact information is contained in the
Machine Status menu on the printer and in the User Guide. If the equipment is causing
harm to the telephone network, the Telephone Company may request that you disconnect
the equipment until the problem is resolved.
15-9Xerox
®
Color 550/560/570 Printer
User Guide
Regulatory Information
To Next Page
Loading...
Need help?
General