Safety
12 Xerox
®
ColorQube 8580/8880 Color Printer
User Guide
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.
Ozone Release
This printer produces ozone during normal operation. The amount of ozone produced is dependent on
print volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in North America, go to:
• Xerox
®
ColorQube 8580 Color Printer www.xerox.com/environment
• Xerox
®
ColorQube 8880 Color Printer www.xerox.com/environment
In other markets, contact your local Xerox representative or go to:
• Xerox
®
ColorQube 8580 Color Printer: www.xerox.com/environment_europe
• Xerox
®
ColorQube 8880 Color Printer: www.xerox.com/environment_europe
Printer Location
• Do not block or cover the slots or openings on the printer. These openings are provided for
ventilation and to prevent overheating of the printer.
• Place the printer in an area where there is adequate space for operation and servicing.
• Place the printer in a dust-free area.
• Do not store or operate the printer in an environment of extreme temperature or humidity.
• Do not place the printer near a heat source.
• Do not place the printer in direct sunlight.
• Do not place the printer where it is exposed directly to the cold air flow from an air conditioning
system.
• Do not place the printer in locations susceptible to vibrations.
• For optimum performance, use the printer at elevations recommended in Elevation on page 173.
See also:
Clearance Requirements on page 172
Environmental Specifications on page 173
Physical Specifications on page 172
To Next Page
Loading...
Need help?
General