Xerox ColorQube 8580 User Guide

Troubleshooting
Xerox
®
ColorQube 8580/8880 Color Printer 157
User Guide
Random Light Stripes are on the Page
Probable Causes Solutions
One of the printhead ink jets is malfunctioning.
• At the control panel, run the Eliminate Light Stripes
procedure.
• To substitute an alternate jet for the malfunctioning
jet, use Jet Substitution Mode.
See also:
Eliminating Light Stripes on page 160
Substituting an Ink Jet on page 161
Image Prints Too Light or Too Dark
Probable Causes Solutions
The print-quality mode specified is incorrect for the print
job.
In the print driver, select the correct print-quality mode
for your print job.
The paper type that is set in the print driver or at the
printer control panel is incorrect.
If the paper you loaded is not plain, set the correct paper
type and size at the control panel and in your print driver.
Unsupported or incorrect paper. Use only Xerox approved paper.
See also:
Selecting a Print-Quality Mode on page 86
Supported Paper on page 46
Printing on Special Paper on page 59

Xerox ColorQube 8580 Specifications

General

Brand	Xerox
Model	ColorQube 8580
Category	Printer
Language	English