Installation and Setup
Xerox
®
ColorQube 8580/8880 Color Printer 31
User Guide
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 10–80%.
Note: Under extreme environmental conditions, such as 10°C and 85% relative humidity, defects
can occur due to condensation.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface.
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.
See also:
Clearance Requirements on page 172
To Next Page
Loading...
Need help?
General