Xerox Phaser 6125 Service Manual

Phaser 6125/6130 Color Laser Printer Service Manual 4-53
General Troubleshooting
8. Click the Ports tab. Verify that the IP Address in the Print to the
Following Ports list is identical to the one on the Configuration page. You
may need to click the Configure Port button to see the IP address. If
necessary, re-select the TCP/IP number used for the printer.
Macintosh Troubleshooting (Mac OS 10.2 and Higher)
The following procedures eliminates cabling, communication, and connection
problems. Once you complete these steps, print a test page from your
software application.
Note
If the job prints, no further system troubleshooting is necessary. If there
are print-quality problems, refer to the User Guide at www.xerox.com/
office/support.
Macintosh Troubleshooting OS 10.2 Step-by-Step
Perform these steps only for Mac OS 10.2 and higher.
1. For AppleTalk, perform the steps below. For TCP/IP, proceed to step 2.
a. From the printer’s Control Panel, verify that the EtherTalk is enabled.
If it not, enable EtherTalk, and reset the printer.
b. Print the Configuration page and verify that EtherTalk is enabled.
c. From the Configuration page, verity the Zone. If you have multiple
zones on your network, verify that your printer appears in the desired
zone.
2. Open the Network Utility and click the Ping tab.
3. Enter the printer’s IP address.
4. Click Ping. If you do not get a response, verify that your TCP/IP settings
are correct for your printer and computer.
Note
See also: www.xerox.com/office/support

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm