Xerox Phaser 6125 Service Manual

3-34 Phaser 6125/6130 Color Laser Printer Service Manual
Error Messages and Codes
Jam at Front Cover
Paper fed from Paper Tray arrived at or left the Registration Sensor early.
Initial Actions
■ Check the paper path for obstructions or debris.
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Drive Clutch Assy Kit (PL3.1.99)
■ Left Side Harness Assy (PL3.1.18)
■ Feeder Assy NV (PL3.1.3)
■ Photo Sensor (PL3.2.13)
■ MCU Board (PL8.2.13)
■ “Map 2 - Laser Unit, Feeder Assembly”
on page 10-9
■ “Map 4 - Toner Dispenser Motors, HVPS,
MCU” on page 10-11
■ “Feeder, Manual Feed, & Registration” on
page 10-19
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper setting
Was the paper setting for the Tray
correct?
Go to step 3. Enter the correct
paper setting,
then go to step
2.
2 Does the error still occur when
printing?
Go to step 3. Complete.
3 Using your finger, check the
Registration Roller and Metal
Registration Roller for contact
Does the spring force on both sides of
the Metal Registration Roller hold it
firmly in contact with the Registration
Roller?
Go to step 4. Replace the
Feeder Assy NV
(page 8-25).
4 Perform the Regi Clutch test
(page 4-33): Service Mode > Engine
Diag > Motor Test > Regi Clutch.
Does the Regi Clutch operate
properly?
Go to step 5. Go to step 6.

Xerox Phaser 6125 Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	17 s
Time to first page (color, normal)	14 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Print speed (color, normal quality, A4/US Letter)	12 ppm
Internal memory	64 MB
Sound power level (standby)	25.7 dB
Sound pressure level (printing)	51.6 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Media weight (tray 1)	64 - 220 gsm
Paper tray media types	Envelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizes	Letter
Multi-Purpose Tray media weight	64 - 164 g/m²
Power requirements	240 V, 50/60 Hz
Networking features	10/100BaseTX
Power consumption (active)	280 W
Maximum duty cycle	40000 pages per month
Sustainability certificates	ENERGY STAR
Power consumption (standby)	50 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	0 - 35 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	15 - 85 %
Certification	CE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC

Weight and Dimensions

Dimensions (WxDxH)	400 x 394 x 389 mm