3-44 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Error Messages and Codes
Image Processor Board Error
Applicable Error Codes
• 016-500 / 016-501 / 016-502
• 017-979 / 017-980 / 017-986 (MFP Only)
• 033-502 / 033-520 / 033-521 / 033-522 / 033-523 / 033-524 / 033-525 /
033-526 (MFP Only)
• 116-315 / 116-317 / 116-323 / 116-324 / 116-326 / 116-327 116-328 / 116-
343 / 116-350 / 116-390 /
• 116-210 / 116-364 / 116-396 / 116-987 (MFP Only)
• 117-315 / 117-331 / 117-344 / 117-362 / 117-363 / 117-365 (MFP Only)
• 123-314 (MFP Only)
• 131-398 / 131-399 (MFP Only)
• 133-259 / 133-260 / 133-261 / 133-269 / 133-271 / 133-272 / 133-273 /
133-274 / 133-276 / 133-277 / 133-281 / 133-282 / 133-283 / 133-286 /
133-287 / 133-288 / 133-289 (MFP Only)
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ IP Board (ESS) (SFP PL8.1.7; MFP
PL8.1.2)
■ “Map 3 - SFP IP Board, LVPS, and Drive”
on page 10-8
■ “Map 8 - MFP LVPS, IP Board, and
Drive” on page 10-17
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Does the error still occur when the
power is turned Off and On?
Replace the
Image
Processor
Board. (SFP
page 8-120;
MFP
page 8-144.)
Complete.
http://www.manuals4you.com
To Next Page
Loading...
Need help?
General