Xerox Phaser 6500 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 8-9
Service Parts Disassembly
Feed Roller
PL3.2.4 (Roll Assy Feed)
1. Remove Tray 1.
2. Open the Front Cover.
3. Lower the Transfer Belt.
4. Remove the Imaging Unit (page 8-7)
5. Reach in through the opening in the bottom of the Imaging Unit cavity and
release the hook on the left side of the roller. Move the roller core to the left
side.
6. Move the Feed Roller to the left, so that the grooves in the Feed Roller are clear
of the pins on the feed shaft.
7. Rotate the Feed Roller 180
o
on the feed shaft and allow the Feed Roller to
drop off the shaft.
Replacement Note
Because there are grooves in only one side of the Feed Roller, it fits over the
pins on the feed shaft in only one direction. Note the location of the grooves
when installing the Feed Roller on the shaft.
s6500-178

Xerox Phaser 6500 Specifications

General

Brand	Xerox
Model	Phaser 6500
Category	Printer
Language	English