Xerox Phaser 6500 Service Manual

Phaser 6500/WorkCentre 6505 Service Manual Xerox Internal Use Only 8-113
Service Parts Disassembly
Drive
Sub-Drive Assembly
PL 7.1.1 (Drive Assy Sub)
1. Perform the service preparation steps on page 8-3.
2. Open the Front Cover.
3. Remove the Left Side Cover (SFP, page 8-18; MFP, page 8-37).
4. Remove the Drive Clutch and Bearing Kit (page 8-48).
5. Remove the Feed Drive Assembly (page 8-117).
6. Remove the Main Drive Assembly (page 8-114).
7. Remove Gear P2 (page 8-116).
8. Release the Interlock Harness from the clamps.
9. Disconnect P/J221 from the Sub-Drive Assembly.
10. Remove the screws (one silver, M4, 6mm; four silver, tap, 8mm) that secure the
Sub-Drive Assembly to remove the drive.
s6500-295
6mm
8mm
8mm
P/J221
8mm
8mm

Xerox Phaser 6500 Specifications

General

Brand	Xerox
Model	Phaser 6500
Category	Printer
Language	English