Xerox Phaser 6500 Service Manual

2-10 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service Manual
Theory of Operation
• Bias Transfer Roller (BTR) – The BTR is a conductive roller that receives positive
voltage from the HVPS. The BTR contacts the rear side of the Belt and applies
the positive voltage to the Belt.
• Belt – The belt is a conductive unit that receives positive voltage from the BTR.
After the negative charged toner image on the drum surface is drawn by the
positive charge on the belt, it is transferred from the drum to the paper. The
Transfer Belt feeds the paper toward the Fuser.
s6500-027
Drum Surface
(Black Toner Image)
Drum Surface
(Cyan Toner Image)
Drum Surface
(Magenta Toner Image)
Drum Surface
(Yellow Toner Image)
Paper
Black
Toner Image
Cyan
Toner Image
Magenta
Toner Image
Yellow
Toner Image
http://www.manuals4you.com

Xerox Phaser 6500 Specifications

General

Brand	Xerox
Model	Phaser 6500
Category	Printer
Language	English