Yamaha QL5 Reference Manual

Setup
Reference Manual
190
Changing the user level
You can view or change the user level.
• Administrator................The Administrator does not have a user level setting, but can
change the user level setting of the Guest account.
• Guest .............................The Guest can view the user level setting of the Guest
account, but cannot change it.
• Normal user ..................A normal user can view the user level setting of his or her
User account, but cannot change it.
• Power User....................A power user can view and change his or her User account.
USER SETUP window
1 CH OPERATION
Here you can specify (for each channel) the operations that will be permitted for input
channels, output channels, and DCA groups. The settings will apply to the currently-
selected channel.
Settings for currently-selected channels will be displayed below the CH OPERATION
section. Use the panel [SEL] keys or the Selected Channel field in the Function Access
Area to select the channel for which you want to make settings. The type of buttons
shown will depend on the selected channel or group.
• INPUT channel................... [HA], [PROCESSING], [FADER/ON]
• MIX/MATRIX channel......... [WITH SEND], [PROCESSING], [FADER/ON]
•STEREO/MONO channel
...................................... [PROCESSING], [FADER/ON]
• DCA group ......................... [DCA MASTER], [DCA GROUP ASSIGN]
• HA....................................... Restricts operation of the HA (Head Amp) patched to that
channel.
• PROCESSING .................... Restricts operation of all signal processing parameters
for that channel (excluding the fader, channel on/off, and
send level).
• FADER/ON.......................... Restricts operation of that channel’s fader, channel on/
off, and send level.
STEP
1. In the Function Access Area, press the SETUP button.
2. In the SETUP screen, press the USER SETUP button.
3. In the USER SETUP window, press the USER LEVEL tab. (If you are logged-in as the
Administrator, press the FOR GUEST button to switch to the USER LEVEL for Guest
page.)
4. Specify the user level by pressing the button for each item that will be permitted.
5. When you have finished making settings, close the window and press the SETUP
button in the Function Access Area.
SETUP screen USER SETUP window
3
4
1
8
2
6
7
5

Yamaha QL5 Specifications

General

DJ mixer	-
Product color	Black
Video capability	No
Channels quantity	72 channels
Supported sample rates	44.1, 48 kHz
Digital sound processing	- bit
Phantom power	48 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	200 W
Total Harmonic Distortion (THD)	0.05 %

Weight and Dimensions

Depth	563 mm
Width	828 mm
Height	272 mm
Weight	21800 g