116
T h e S o n g J o b s
07 : Chord Sort
Sorts all notes in the specified measure range which fall on the
same beat (i.e. chords) so that the notes are arranged in order from lowest
to highest or from highest to lowest.
First beat.
First measure. Last measure.
Last beat.
The “TR” parameter selects the track to be affected by the Chord
Sort job: “01” … “16”.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Type” parameter determines whether the chords in the
specified range are arranged from lowest to highest note (“Normal”) or
from highest to lowest note (“Reverse”).
After setting the parameters as required press [ENTER] to execute
the Chord Sort job. The metronome icon will appear on the display while
the data is being processed, then “Completed” will appear briefly when
the job is done. Press the [EXIT] key to return to the job list, or a mode key
to go directly to the selected mode.
To Next Page
Loading...
Need help?
General
