132
T h e S o n g J o b s
20 : Expand Backing
“Expands” the accompaniment track data — i.e. the pattern and
chord data — and places the results in the normal sequencer tracks after
converting the data to standard MIDI format. The expanded data is placed
in sequencer tracks 9 through 16 (see chart below). Any previous data in
those tracks will be erased!
Press [ENTER] to execute the Expand Backing job. The metronome
icon will appear on the display while the data is being processed, then
“Completed” will appear briefly when the job is done. Press the [EXIT] key
to return to the job list, or a mode key to go directly to the selected mode.
Pattern Track Sequencer Track
D1 9
D2 10
PC 11
BA 12
C1 13
C2 14
C3 15
C4 16
■
NOTE
• If the “Ds3” (Drum set 3) is assigned to the D1, D2 or PC track of the expanded
pattern, the drum voice settings will be copied to “Ds2” (Drum set 2). The previous
settings in Ds2 will be overwritten (erased).
To Next Page
Loading...
Need help?
General
