127
9
T h e S o n g J o b s
15 : Create Measure
Creates a specified number of blank measures having the specified
time signature for all tracks. The created measures are inserted at a
specified measure number, and all subsequent measures are moved
forward to make room.
First beat.
First measure. Last measure.
Last beat.
The “M” parameter above the graphic bar specifies the measure at
which the newly created measures will be inserted.
The time signature parameter below the graphic bar determines the
time signature of the measures to be created: 1/16 … 16/16, 1/8 … 16/8,
1/4 … 8/4.
The “Measure” parameter below the bar specifies the number of
measures to be created.
After setting the parameters as required press [ENTER] to execute
the Create Measure job. The metronome icon will appear on the display
while the data is being processed, then “Completed” will appear briefly
when the job is done. Press the [EXIT] key to return to the job list, or a
mode key to go directly to the selected mode.
■
NOTE
• All existing measures after the point at which the new measures are created will be
moved forward to make room for the new measures.
• If you use the Create Measure job with an empty song, the specified new
measures will be placed in track 1 only.
• Use Create Measure when you want to add new material somewhere in the middle
of data you’ve already recorded, without erasing the existing data. First create the
required measures, then either copy the data from existing measures using the
Copy Event function, or record new data as required.
To Next Page
Loading...
Need help?
General
