126
T h e S o n g J o b s
14 : Time Stretch
Lenghtens or shortens the specified track by a specified percentage
without affecting tempo or pitch.
The “TR” parameter selects the track to be affected by the Time
Stretch job: “01” … “16” for the sequencer tracks, or “Al” for all se-
quencer tracks.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Time” parameter specifies the percentage by which the time
is to be lengthened or shortened: “50%” … “200%”. Gate time of notes
in the specified track and measures will also be changed in proportion to
this setting.
After setting the parameters as required press [ENTER] to execute
the Time Stretch job. The metronome icon will appear on the display while
the data is being processed, then “Completed” will appear briefly when
the job is done. Press the [EXIT] key to return to the job list, or a mode key
to go directly to the selected mode.
First beat.
First measure. Last measure.
Last beat.
To Next Page
Loading...
Need help?
General
